A technician in plain dark workwear kneeling at the bottom corner of a closed residential garage door, adjusting a lower bracket and cable with a wrench, tidy suburban driveway, overcast light

Garage door repair · Fraser, MI

Garage Door Repair in Fraser, MI

We repair springs, cables, tracks and openers at Fraser homes, and when a door is past fixing we install a new one. Call and describe the trouble, and a technician comes to you to look it over and explain the options.

  • Licensed and insured
  • Parts-and-labor warranty
  • Upfront quote before work
  • Locally owned

Repairs in Fraser

Garage door repair in Fraser, and installation when a door is done

A garage door that has stopped working falls into one of two groups. Either one part has failed and the rest of the door is in good shape, or the door has worn out as a whole and each repair only delays the next failure. Garage door repair in Fraser begins with working out which group yours is in. A broken spring, a cable off its drum, or a stripped roller is a repair. Panels that are cracked through, sections that have bowed, or a frame that has rotted at the bottom point toward a new door.

Fraser is a city in Macomb County and a northern suburb of Detroit. That puts it in the same freeze and thaw weather as the rest of southeast Michigan, and a door that opens and closes through those swings gives its springs, tracks and weatherstripping a workout. We repair what can be repaired, and when we say a door should be replaced, we show you the damage that led us there.

Before we touch anything we go over the whole system. If the trouble is the motor rather than the door, opener repair is its own job and we handle it once the door itself moves freely. Warren Garage Door Co is locally owned and operated, and our technicians are uniformed and explain the problem before starting.

A technician in plain workwear standing inside a garage lifting a section of a new insulated sectional garage door into the track, concentrating on alignment, clean garage interior

Repair or install

Repair or install: what we look at to decide

Spring and cable condition

Springs and cables are the most common failures and the most repairable. If the rest of the door is sound, a new spring and cable set brings it back to full working order.

Panel and section damage

A dent in one panel can be dealt with. Cracks that run across several sections weaken the door, and then installation of a new door is the better plan.

Track alignment

We sight down each track and check the mounting to the wall. Bent tracks are straightened, and badly crushed ones are replaced.

Door age and repeat repairs

A door that needs a new part every season is telling you something. We go over what each repair would involve against what a new door would involve.

Opener fit

A new door must match the opener that lifts it. We check that the opener is rated for the door's weight and that the travel is set correctly after any work.

Opening and framing

Installation depends on the opening. We look at the frame, the header and the side jambs for rot or movement before we plan a new door.

Our process

What happens after you call

  1. Describe what the door is doing

    Say whether it will not open, will not close, is noisy, or has come off one side. Those details tell us which parts to bring.

  2. We come to Fraser and inspect

    The technician checks the hardware, tests the balance, and looks over the panels and frame.

  3. You get the findings and the price first

    We explain whether repair or a new door makes sense and give an upfront quote before any work begins.

  4. We repair or install, then test

    Once you agree, we do the work and run the door through its full travel, checking balance and the reverse function before we leave.

Not sure whether your door can be saved or needs replacing?

Describe the damage and we will give you a straight answer on repair versus a new door.

Recent work

Repaired and newly installed garage doors

A newly installed insulated garage door in a neutral gray finish on a two-story suburban home, closed, tidy driveway, evening light
Close-up of a pair of freshly installed torsion springs on a steel shaft above a garage door, center bracket visible, plain unmarked hardware
Close-up of a new garage door bottom bracket, cable end and a clean rubber bottom seal

Questions

Fraser garage door repair and installation questions

When is it better to replace a garage door than repair it?
Replace when several panels are cracked or bowed, the frame has rotted, or the door keeps needing repairs. Repair when the damage is limited to hardware such as springs, cables, rollers or a single panel.
What is the most common garage door repair?
Broken torsion springs lead the list, followed by cables that have slipped or frayed and rollers that have worn out. Springs are rated for a set number of open and close cycles, so they fail from use, not from neglect alone.
Can a broken spring be replaced on its own?
One spring can be replaced, but if the door has a pair, the second has done the same amount of work and is likely close to failing. We usually recommend replacing both so the door stays balanced.
How is the price of a repair or new door worked out?
For repairs it comes down to the parts needed and the size and weight of the door. For a new door it also depends on the size of the opening, the material and the insulation you choose. We give an upfront quote before any work begins.
Is the warranty on both repairs and installations?
Yes. Our repairs and installations are backed by a parts-and-labor warranty, and we explain what that covers when we give you the quote.
Can I keep using the door while I wait for the visit?
If it moves smoothly, yes. If it is stuck, off its track, or you suspect a broken spring, leave it where it is and do not try to force it with the opener or by hand.

Fraser, MI

Door giving out in Fraser?

Tell us what has gone wrong. We will come out, check the springs, cables and tracks, and let you know whether a repair or a new door is the sensible move.